| View previous topic :: View next topic |
| Author |
Message |
Randy Pendleton
MC crawler
Joined: 26 Jan 2010
Posts: 7
Location: mansfield
|
 Posted: Sat Jan 30, 2010 12:01 pm Post subject: 420 c repair ? |
 |
|
| Where is good place to look for new gauges for 420 crawler priced a new tach at john deere and they wanted over $300 for a new tach and $85 for the cable.Is there after market parts some where. Thanks |
|
| Back to top |
|
 |
Digger SR
40C crawler
Joined: 31 Oct 2009
Posts: 12
Location: La Crosse WI 54601
|
| Posted: Sat Jan 30, 2010 2:29 pm Post subject: |
|
|
Am doing the same on a 440IC. Was on ebay and found all of them from one guy from Contraryacres.com. Seem to be pretty good stuff so far. Just got them today in the mail, and he sent a catalog with the order. Lots of parts
Jeff
_________________
440 IC #448161 W/Henry loader, 3020 D, #8 mower |
|
| Back to top |
|
|
Lavoy
Site Admin
Joined: 03 Apr 2005
Posts: 4546
Location: North Dakota
|
| Posted: Sat Jan 30, 2010 3:48 pm Post subject: |
|
|
There is no other source for tachs, even the Deere tach will be incorrect. As far as tach cable and gauges, I have them.
Lavoy |
|
| Back to top |
|
|
Randy Pendleton
MC crawler
Joined: 26 Jan 2010
Posts: 7
Location: mansfield
|
| Posted: Sun Jan 31, 2010 7:12 am Post subject: |
|
|
| so where can I get an tach for my 420 c that will work? |
|
| Back to top |
|
|
Lavoy
Site Admin
Joined: 03 Apr 2005
Posts: 4546
Location: North Dakota
|
| Posted: Sun Jan 31, 2010 10:40 am Post subject: |
|
|
IF you are not concerned about originality, the Stewart Warner HD's will work fine.
Lavoy |
|
| Back to top |
|
|
|
