hyd remote control valve

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
cflorence
MC crawler
MC crawler
Posts: 3
Joined: Mon Feb 22, 2010 7:35 pm

hyd remote control valve

Post by cflorence » Sun Feb 28, 2010 9:43 pm

Can leaking themal relief valves be replaced without completely rebuilding a single remote control valve? This is on a 58 420C. System seems to operate normally but the relief valve does leak quiet a bit.

Chuck
Carthage, NY

Were can I find two replacement relief valves if they can be replaced?
Chuck Florence
Carthage, NY

User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Mon Mar 01, 2010 11:00 am

Yes they can, push in slightly on the valve, then remove the snap ring that is above the disc that hold the valve. Pull on the valve with a pliers or whatever, and you should be able to pull the disc out. Be careful, there is a spring under the disc. If the disc is really rusted into the valve body, you may be able to turn the relief out with a wrench and not even take the disc out.
Lavoy

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests