General help and support for your Lindeman through 2010 John Deere crawler
-
gus
- 2010 crawler
- Posts: 726
- Joined: Mon Jul 16, 2007 11:55 am
- Location: North West
-
Contact:
Post
by gus » Sat Jul 24, 2010 7:15 pm
Did factory rock guards have wear strips welded on? Mine have and I am not sure if they were original or put on later. They look rather odd on the front where the strip goes above the regular plate. Almost looks like someone got strips for a 4 roller and put them on a 5 roller!!
Gus
-
Paul Buhler
- 350 crawler
- Posts: 993
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Post
by Paul Buhler » Sat Jul 24, 2010 8:24 pm
Is this helpful? Picture is from the JD 420 parts manual. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
-
Lavoy
- Site Admin
- Posts: 11154
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sat Jul 24, 2010 10:32 pm
Yes, they have a piece of 1/4" strap give or take welded to the bottom.
Lavoy
-
gus
- 2010 crawler
- Posts: 726
- Joined: Mon Jul 16, 2007 11:55 am
- Location: North West
-
Contact:
Post
by gus » Sun Jul 25, 2010 11:58 am
Well, I guess they are factory!!
Look just like the picture too
Gus
Who is online
Users browsing this forum: No registered users and 2 guests
