Post support questions about your JD350 and newer crawler here
-
bjurcina
- MC crawler
- Posts: 4
- Joined: Sat Sep 13, 2008 11:01 am
Post
by bjurcina » Sun Aug 22, 2010 5:35 am
I have a JD 350b Track Loader that is in need of tracks and chains. I found a JD 1010 that supposidly has a perfect undercarage but no motor. Any chance these parts will work on my 350B? Thanks.
-
Lavoy
- Site Admin
- Posts: 11115
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sun Aug 22, 2010 10:41 am
Bottom rollers only.
Lavoy
-
bjurcina
- MC crawler
- Posts: 4
- Joined: Sat Sep 13, 2008 11:01 am
Post
by bjurcina » Sun Aug 22, 2010 1:25 pm
Thanks Lavoy.
-
Lavoy
- Site Admin
- Posts: 11115
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sun Aug 22, 2010 4:15 pm
Wait a minute, I screwed up. Pads will work also as well as upper idlers, hyd track adjusters are the same too.
Lavoy
-
bjurcina
- MC crawler
- Posts: 4
- Joined: Sat Sep 13, 2008 11:01 am
Post
by bjurcina » Sun Aug 22, 2010 5:24 pm
Thanks again but the most important item will be the links and also drive clutches. If they won't work then it's not really worth the effort.
-
Lavoy
- Site Admin
- Posts: 11115
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Sun Aug 22, 2010 8:24 pm
No, links are different. As far as clutches, 350 clutch parts are cheap and readily available.
Lavoy
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Sun Aug 22, 2010 8:44 pm
links or chains/tracks are same as late 2010 42000 up
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
bjurcina
- MC crawler
- Posts: 4
- Joined: Sat Sep 13, 2008 11:01 am
Post
by bjurcina » Mon Aug 23, 2010 5:24 am
Understood, thanks again.
Who is online
Users browsing this forum: No registered users and 261 guests
