10 series winch question

[Builder Bob]

I finally got the 10 series winch on my 350, put 80 wt in the right side, but am curious about the left side. It seems I have the older version of the 10 series winch which the manual doesn't completely cover. It looks like there should be oil (what weight I don't know) in the left side. There is the large bung type cover on the side (page 145-5-1 in SM 21034 shows it) and there appears to be a fill level forward of the quill. Since the brake and clutch are on that side, can there still be oil there too? The picture refers to the oil line that goes to the accumulator, but there is nothing I can find that talks about this. Anybody got a 10 series winch who can help with this. Thanks

[gerald]

Bob what winch did you put on your tractor series 10 winch I think is a 10 ton . I wished I still had the old woods pto winch from the saw milling days behind my house . Gerald.

[Builder Bob]

According to the book the cable pull with a bare drum is 10,600 lbs. With a full drum it is 6,650 lbs at 2100 rpm. I put it on a late 60's/early 70's 350.