General help and support for your Lindeman through 2010 John Deere crawler
-
snickers
- 40C crawler
- Posts: 16
- Joined: Fri Oct 29, 2010 8:27 pm
- Location: pacific, wa
Post
by snickers » Thu Feb 10, 2011 9:07 pm
Has anybody built or have the specs on the front idler spacer? Part # M2814T
wanted to know if its hardened? and Dimentions
1957 420c
-
Lavoy
- Site Admin
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Feb 11, 2011 8:47 am
I am working on new ones, got the die made, just don't have enough push.
Lavoy
-
snickers
- 40C crawler
- Posts: 16
- Joined: Fri Oct 29, 2010 8:27 pm
- Location: pacific, wa
Post
by snickers » Fri Feb 11, 2011 10:44 am
how big is your press?
i was going to build a die set for them but really need to know what the dimensions and type of steel they were built from? the ones that were on my machine are so bad that i cant even measure the diameter of the bolt.
any ideas?
1957 420c
-
Lavoy
- Site Admin
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Feb 11, 2011 3:21 pm
The rod is an odd size, not commonly available, the guy that is making the blanks for me located it.
I have a 20 ton press, not even in the ballpark as far as what is needed. Going to remake the die and put it in a 200 ton brake and see what that does.
Lavoy
-
foxd
- 440 crawler
- Posts: 121
- Joined: Sat May 14, 2011 6:18 am
- Location: Mt. Pleasant, IA
Post
by foxd » Wed Apr 03, 2013 7:40 am
Lavoy,
Did you ever have any luck making some of these spacers? I am in need of a pair.
Thanks Dave
'39 B, '48 B, '49 A, '50 B, '54 40U, '55 40U, '59 430U, '60 430C
-
Lavoy
- Site Admin
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Apr 03, 2013 7:51 am
I don't have enough press to do it, so nothing yet.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 85 guests