how do I i post a picture

gerald · Post by **gerald** » Thu Nov 11, 2010 7:56 am

I have look evey where trying to figure how to post pictures. Gerald

Pammark · Post by **Pammark** » Fri Nov 12, 2010 9:11 am

Start by setting the size of your pictures to about 600 pixels wide. That will make a nice size picture and not too large.

Go to www.photobucket.com and setup an account using your e-mail address. It is free. Once you have an account, you can download your pictures to it.

You will see your small pictures shown with the top header [edit] [share] [delete]. Select the [share] and click [share now]. The top tab reads "Get Link Code" and click that. You will see a list of codes for the picture. 4th one down says "IMG for bullentin boards and forums" and highlight the code in the box "Full Size". Right click mouse and [copy]

Go to the JDCrawler post box and paste the code in.

You will see a long code similar to this;

http://i836.photobucket.com/albums/zz28 ... RIMER9.jpg[/IMG]

with a

command says you are done with the image import. The pammark in the middle is my account. Your code will list your username. The PRIMER.jpg is the name of the picture to post.

If you have more than one picture, you can copy the code and paste again and again in the JDCrawler post box. Just edit the image filename for each one.

Let me show you how this works. I'll insert the code back in like it should with the

BINGO

Tigerhaze · Post by **Tigerhaze** » Fri Nov 12, 2010 9:23 am

Mark gave a pretty good step by step explanation- there is also a post from me in the "Messageboard Q&A and Announcements" forum that describes and shows this process with pics as well.

gerald · Post by **gerald** » Fri Nov 12, 2010 7:57 pm

gerald · Post by **gerald** » Fri Nov 12, 2010 8:01 pm

Im working on the hoe. I hobe it's a brutte the hyd are amazing 40 year old machine.

gerald · Post by **gerald** » Tue Feb 15, 2011 8:52 am

[/img]http://s1041.photobucket.com/albums/b415/geraldl54/

gerald · Post by **gerald** » Tue Feb 15, 2011 10:13 pm

It was easy, the only thing i should have done was remove the final pan first. I had to use a comealong chaining it to the back the machine an let the jack off to get the pan off for cleaning an inspection. The pinion has a broke tooth. I got 1 0n order. It took longer to clean then to take apart.

gerald · Post by **gerald** » Tue Feb 15, 2011 10:33 pm

Im determined do photo Smart

gerald · Post by **gerald** » Tue Feb 15, 2011 10:47 pm

gerald · Post by **gerald** » Tue Feb 15, 2011 10:50 pm

gerald · Post by **gerald** » Wed Feb 16, 2011 11:22 pm

A little bit of trash there I'm thinking that it the proublem.
Someone said its easyer to fix it then trying to clean it an make it work . We have to learn the hard way.

Post by **Lavoy** » Thu Feb 17, 2011 10:16 am

Make sure you pull the drive shaft out, it should not have stayed in the rear end like that.
If you don't have access to a steam cleaner, Easy Off oven cleaner really strips the inside of a clutch housing well.
Lavoy

JDcrawlers Messageboard

how do I i post a picture

how do I i post a picture

nov 2010 befor the pm she is loading up

testing the crawer out

final removal 1970 350 crawer

Who is online