![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00352.jpg)
Now that it is home in the driveway .....
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00394.jpg)
Some things I noticed....
It must have had a grapple at one time....
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/Saskatoon-20120324-00379.jpg)
the MODEL number is there...SNT4E3D024385T
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00383.jpg)
AND SERIAL ON DASH SNE7350006173W
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00388.jpg)
The best one is that the seller told me it was a wide pad loader...turns out ....What he meant is... that "The pads are too wide!"
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00389.jpg)
I'm not sure what to do here, Cut them back?
I do not think they changed the sprockets though...
however is this a big problem????
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/IMG-20120324-00391.jpg)
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/Saskatoon-20120324-00377.jpg)
All in so far it looks like It is a good project crawler for me. I put a winch on my 350b loader and I need a home for my backhoe. I might move the winch to this 350 if it has a good engine etc and put the hoe back on the 350b. The Dozer tracks would be good for pulling logs with the winch.
Missing...the belly pans, the ignition key, one bucket tooth, most of the seat cushions, the weights that were on the back (wont need them anyway) .
I plan on starting it tomorrow if it is willing. I have new oil and filter, Diesel fuel and fuel filters and batteries. Any suggestions on pre start things to do are appreciated.
![Image](http://i1058.photobucket.com/albums/t407/ascottyb/Saskatoon-20120324-00378.jpg)
I will try to post tomorrow night after I give it a go!
Scottyb