2010 Trans filter

[jb660r]

Does anyone know a cross ref hyd. filter for a 2010 the number on the filter is AT15282[/img]

[wildbill65]

I'll get back to you on that filter. I replaced this filter (transmission) on my 2010 recently. I picked up a new one from my Deere dealer. I'll check my sales ticket for the part number this evening.

The hydraulic filter is just forward of this filter. There is a 3-bolt plate that must be removed to inspect/clean/replace this filter. Mine is a metal screen-type filter that can be cleaned and re-used. If you chose to replace this filter............look at spending $130. Also, all trans/hydraulic fluid must be drained before removal.

Note: The transmission filter can be removed without draining the fluid.

Thanks,
Bill

[Tigerhaze]

Does anyone know a cross ref hyd. filter for a 2010 the number on the filter is AT15282[/img]

Baldwin has a filter (PT92) that crosses with AT15282. I have not tried to so can't say if it is an exact fit or not.

http://catalog.baldwinfilter.com/

[jb660r]

NAPA sells one too. They could have had it in three days, but my Deere dealer is getting it next day (tomorrow morning). Its 37.50 from the dealer, and since I didnt ask NAPA how much I figured I would check for anyone who may be replacing one in the future. The NAPA filter is $26, ten bucks isnt a huge deal but if I would have asked I probably just would have gotten it from there.