Any ideas on where to get a injection pump bench tested and how much it cost????
Thanks,
royboy
Roosa-Master pump bench tested..
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Roosa-Master bench test
If you don't have a dedicated pump shop, try truck stops,truck dealers, tractor dealers, and etc. . Greg
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Re: Roosa-Master pump bench tested..
In any pump shop I worked in - it was standard policy to never mount anyone's pump on the test stand unless we had it apart first (and worked on it). Many consider it too risky to install a pump in unknown condition on a very expensive test bench. It's also takes a bit of labor. Half the time spent in pump repair is mounting on the stand and testing.royboy wrote:Any ideas on where to get a injection pump bench tested and how much it cost????
Thanks,
royboy
Some tests you can do yourself pretty easy. What exactly are you trying to find out? If it's injecting, timing advance?
Who is online
Users browsing this forum: No registered users and 85 guests