possible source of noise?

glindy · Post by **glindy** » Mon Oct 15, 2012 11:16 pm

Have been clearing honeysuckle/4in trees w 350 and getting use to it. But sometimes it gives a loud intermittent squeal out when pushing a load/tree over,I back off and go again and it shoves with no noise. I know the left rear needs clutches/brake band,but what other areas would have a coupling that would produce a loud squeal?
The trans/rear area also seems really noisy especially in 2/r under no load,combined w engine noise,have to wear earmuffs on it.

vestor_guy · Post by **vestor_guy** » Tue Oct 16, 2012 12:57 am

Is the squeal you are hearing similar to the hydraulic relief valve?

glindy · Post by **glindy** » Tue Oct 16, 2012 1:05 am

not sure,it is a high pitched squeal. how would i make the relief valve activate to hear it?

glindy · Post by **glindy** » Tue Oct 16, 2012 6:55 pm

That could be,as the left side needs brake band. Was using it today and thought I heard it a couple times,more on that side.
Damn honeysuckle will kill ya,shoved in a couple sink holes for deer season and it broke some quick links I used for mesh hanging off the rear.

JDcrawlers Messageboard

possible source of noise?

possible source of noise?

Who is online