General help and support for your Lindeman through 2010 John Deere crawler
-
Howard Yoder
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Mon Oct 01, 2012 5:55 pm
I had a ring gear in the rear end break one time you may want to check that.
-
Lavoy
- Site Admin
- Posts: 10942
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Oct 02, 2012 8:06 am
Measure freeplay with a dail indicator and shim for the proper preload.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
454BBGB
- 40C crawler
- Posts: 18
- Joined: Tue Jun 26, 2007 7:09 pm
- Location: Green Bay ,Wi
Post
by 454BBGB » Sun Dec 16, 2012 7:29 am
Found issue , the rollers behind the cam were not seated in properly . All back together and back into the dirt. I would like to Thank all who had input. Happy Holidays . Be safe.
2 Lungs
Who is online
Users browsing this forum: No registered users and 37 guests
