1010 rebuild costs
1010 rebuild costs
well i have the front grille and nose removed - i am sending the rad ouyt for a pressure test and possible recore or rod it out , i thought i best ask what a rebuild kit is worth and the sleeve and pistons - i do not know of their condition or crank needs but it smokes alot and i can hear some light knocking so i suspected i best know the costs involved . it would be nice if i just had to remove the ridge and do some ring work and polish the crank but i best get the low down on the kit and sleeve - it would be delivered in a box in NY and i run across to pick up . i did call my dealer a while back and he scared me off so lets see what Lavoy can offer me up and see if i can help him out with the purchase . thanks and im going in
kt
Last I checked, in the $2300 range with no head parts.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Willyr
- 2010 crawler
- Posts: 695
- Joined: Sat Jul 17, 2010 3:03 am
- Location: Downeast Maine (North of Ellsworth)
You will need to check your rods and the wrist pins for slop. #1 cause for a knock in a engine. Be a shame to tear it down and put it back together with out investing a bit more to get it right.
former owner of a 1956 420c
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
Don't know the breakdown, that was a kit price from one of my vendors a while back. Would take some digging to get individual prices, probably a larger variance nowadays between gas and diesel.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: Bing [Bot] and 158 guests