Eastwood welders
Eastwood welders
does anyone have any experience with Eastwood welders and plasma cutters. Their prices are reasonable but I'm concerned about the qualitty. gsont
We had Eastwood plasma cutters where I used to work. They were great little machines and had no issues with them. They were used daily as well so I know they had several hours on them. However, I haven't had any experience with Eastwoods welders. I would suspect that they are equally as good as the plasma cutters.
Maybe some of these other guys have had some experience with them and will jump in here. That's what I know... Hope it helps a little.
Maybe some of these other guys have had some experience with them and will jump in here. That's what I know... Hope it helps a little.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
-
- 1010 crawler
- Posts: 305
- Joined: Mon Apr 04, 2005 7:01 pm
- Location: Gloucester,Virginia
Welders
I bought a mig welder from Eastwood years ago.It was the biggest piece
of junk ever.I never could get it to hold a steady arc.It is
sitting in the junk pile and I replaced it with a lincoln sp135.I have had good luck with it.The few things I have bought from Eastwood,like spotwelder and spot weld cutters were junk.I feel they are overpriced
and I don't deal with them anymore period! Since you asked I would
recomend buying any welder or plasma cutter from someone who
makes them like Hypertherm,Miller,Lincoln,Hobart or others.Get what
you pay for.JMHO,Luck ,JimAnderson
of junk ever.I never could get it to hold a steady arc.It is
sitting in the junk pile and I replaced it with a lincoln sp135.I have had good luck with it.The few things I have bought from Eastwood,like spotwelder and spot weld cutters were junk.I feel they are overpriced
and I don't deal with them anymore period! Since you asked I would
recomend buying any welder or plasma cutter from someone who
makes them like Hypertherm,Miller,Lincoln,Hobart or others.Get what
you pay for.JMHO,Luck ,JimAnderson
Who is online
Users browsing this forum: No registered users and 18 guests