350 parts

[lane_neal]

I am looking for a source of suppply for aftermarket master link pins, and pad bolts, I haven't had much luck finding these, my machine is a plain 350. Thanks for any leads.

[Lavoy]

By link pins do you mean pins and bushings? If so, not worth the effort, new rails are only a few hundred dollars more then pins and bushings and labor.
Bolts are readily available, what do you need?
Lavoy

[lane_neal]

I am looking for replacement master link pins, I had to break both chains and need two replacement pins. My other need is bolts to replace worn and loose bolts securing the pads. Hope this clarifies my needs, thanks for the help.

[lane_neal]

I am looking for information to replace the "master link" pin, not all the pins and bushings. I had to cut the pins out to open the chain, so hence I need to replace the "two" pins, one in each chain. I am also looking for replacement bolts for pads, the heads are worn on some pads to the point they can't be tightened and will have to be cut off and replaced. I hope this clears up what I'm trying to do and the parts I am tryiing to find, thanks again.

[LeonardL]

Dude , Have you called Lavoy? I think he can help you and this is pretty much what he said. If you haven't, then get his number off of this site. He owns this site for the purpose of his business which is parts and restoration and we are just here as guests. Give him a call.

[Lavoy]

I have the old style T head pins and hand, but probably only one drive master pin, which style do you need?
Lavoy