420 Front idler spacer

snickers · Post by **snickers** » Thu Feb 10, 2011 9:07 pm

Has anybody built or have the specs on the front idler spacer? Part # M2814T
wanted to know if its hardened? and Dimentions

Post by **Lavoy** » Fri Feb 11, 2011 8:47 am

I am working on new ones, got the die made, just don't have enough push.
Lavoy

snickers · Post by **snickers** » Fri Feb 11, 2011 10:44 am

how big is your press?
i was going to build a die set for them but really need to know what the dimensions and type of steel they were built from? the ones that were on my machine are so bad that i cant even measure the diameter of the bolt.
any ideas?

Post by **Lavoy** » Fri Feb 11, 2011 3:21 pm

The rod is an odd size, not commonly available, the guy that is making the blanks for me located it.
I have a 20 ton press, not even in the ballpark as far as what is needed. Going to remake the die and put it in a 200 ton brake and see what that does.
Lavoy

foxd · Post by **foxd** » Wed Apr 03, 2013 7:40 am

Lavoy,
Did you ever have any luck making some of these spacers? I am in need of a pair.
Thanks Dave

Post by **Lavoy** » Wed Apr 03, 2013 7:51 am

I don't have enough press to do it, so nothing yet.
Lavoy

JDcrawlers Messageboard

420 Front idler spacer

420 Front idler spacer

Who is online