350 transmission

[rcs110]

has any rebuilt a transmission on a 350 , after sitting all winter I did some work with the 350 this weekend and started to hear a noise in reverse the 350 stopped and i could not sift it out of gear,
it has a reverser and it was making a winding noise in when in reverse,
while moving forward it stopped, unable to sift it in to neutral on the transmission gear sift , I did have to add oil to transmission and then I was able to get it moving again It was stuck on a hill when i added the oil.

the 350 after that worked fine for about one hour then started to here like a bearing noise it got stuck again and after shifting it back and fourth it started to move so i parked it and now thinking i broke something in the transmission. any one have any ideas??

[KenP]

deleted

[rcs110]

[rcs110]

[rcs110]

[rcs110]

http://i1252.photobucket.com/albums/hh5 ... 1367023535
http://i1252.photobucket.com/albums/hh5 ... 1367023527
http://i1252.photobucket.com/albums/hh5 ... 1367023844
http://i1252.photobucket.com/albums/hh5 ... 1367023808
http://i1252.photobucket.com/albums/hh5 ... 1367023721
http://i1252.photobucket.com/albums/hh5 ... 1367023679
http://i1252.photobucket.com/albums/hh5 ... 1367023705

[rcs110]

well after taking it apart it looks like I will have to get the following parts :
1. transmission input shaft with new bearings( the rear bearings broke apart took a few gears with it. t23653 shaft & jd8187 bearing &jd8225 bearing cup

2.2nd and reverse speed gear t16326

plus a few small other things that I found wrong that need to be fix.

so far it took 6 hours to take apart. the only thing left is to remove the transmission form the machine and that I need help with, so I to wait til May to get this done.

will post more pictures when that happens.

[rcs110]

http://i1252.photobucket.com/albums/hh5 ... jpg?t=1367
http://i1252.photobucket.com/albums/hh5 ... 3773023705

[jdlou]

Thanks for the upclose and personal pictures. It gives all of us something to refer to in the future. Good Luck on the rebuild!!! jdlou

[rcs110]

well just took off the transmission

now its time to rebuild it.

[/img]

[Lavoy]

I can get quite a few new 350 trans parts if you need them.
Lavoy

[rcs110]

[rcs110]

well I got it done with the help from Lavoy finding and shipping me all the parts I needed. two days to put it back together and finding out one of the drives was not happy with thew brake band I must say I got pretty good in removing the drives ,and putting them back on. here are some pictures of it . its working fine now and once again thanks Lavoy with all your help with the parts.

[Lavoy]

Man, what a lot of work, but gratifying once it is all back together.
Lavoy