General help and support for your Lindeman through 2010 John Deere crawler
-
afi
- 40C crawler
- Posts: 13
- Joined: Sat May 03, 2008 5:32 pm
- Location: Boston
Post
by afi » Fri Apr 05, 2013 6:03 pm
well i took dukes advice avice used a little. more starting flluid it chuged a couple times and spit out a lot of thick smoke then started riht up let it run a bit shut it off and it started fine. we'll see what happen tomorrow
Thanks Tony
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Fri Apr 05, 2013 6:59 pm
Glad it is running!!
Add some Sea Foam to your fuel.
Wouldn't hurt to add some to the crankcase as well.
Clears out the carbon and frees up the rings in your pistons.
Duke
-
afi
- 40C crawler
- Posts: 13
- Joined: Sat May 03, 2008 5:32 pm
- Location: Boston
Post
by afi » Sat Apr 06, 2013 3:24 am
well i took dukes advice and used more starting fluid, it chugged a couple times blew out alot of black smoke and then started. let it run a little shut it off and it started right up again. we'll see what happens today from a cold start
Thanks Tony
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Mon Apr 08, 2013 10:42 am
I wouldn't use starting fluid on a 1010- too many bad things can happen. I've done it too but it is tempting fate.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: gus and 65 guests
