1010 Bachhoe attachment
-
- MC crawler
- Posts: 3
- Joined: Fri May 10, 2013 8:25 am
- Location: nny
in the book they used the 50 and 51 on both the 440 and the 1010 looks like the mounting brackets are different on 440 vs 1010 if you have rear mounting bracket on your 440 it should go right on there or if you get the 1010 brackets if the bottom bolt area is the same you could make the top bracketing i would think .....go to jd parts online look at to parts book (PC619) pages 30 32 33 and you can see what some of the bracketing looks like ....hope this helps
Last edited by jtrichard on Fri May 10, 2013 11:49 am, edited 1 time in total.
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
- MC crawler
- Posts: 3
- Joined: Fri May 10, 2013 8:25 am
- Location: nny
-
- MC crawler
- Posts: 3
- Joined: Fri May 10, 2013 8:25 am
- Location: nny
420 is completely different as far as mounts, no interchangeability at all, in fact, I have never even seen the factory 420 mounts other than in a parts book.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: Bing [Bot] and 117 guests