mc rails and pads

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
lennythemonster
MC crawler
MC crawler
Posts: 1
Joined: Mon May 06, 2013 9:48 am
Location: british columbia

mc rails and pads

Post by lennythemonster » Fri May 17, 2013 10:14 pm

will the rails and pads off of a 40 fit on an mc

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Sat May 18, 2013 8:40 am

Yes, as long as they are 28 links long.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
snoopy
440 crawler
440 crawler
Posts: 110
Joined: Tue Jan 29, 2008 12:18 pm
Location: Banks Oregon

Re: mc rails and pads

Post by snoopy » Sun May 19, 2013 7:07 pm

lennythemonster wrote:will the rails and pads off of a 40 fit on an mc
I do believe that the width of the pads need to be the same as what you have or you will need the correct drive sprockets.
1949 MC
"If it ain't broke, don't fix it"

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10936
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Mon May 20, 2013 8:46 am

Pad width shouldn't matter unless you are narrowed up, or might have blade clearance issues. Look at all the clearances to the pads you have now, and that will give you an idea.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests