Post support questions about your JD350 and newer crawler here
-
Nigel
- MC crawler
- Posts: 5
- Joined: Mon May 06, 2013 3:33 am
- Location: Queensland, Australia. GMT+10
Post
by Nigel » Tue May 28, 2013 4:51 am
Can anyone help me with info on the best way to change the fan belt on a 350B Drott?
It looks like I have to take the hydraulic pump off and separate the shaft.
If there is an easier/correct way I would like to know!
-
rockslayer16
- 420 crawler
- Posts: 29
- Joined: Fri Jan 18, 2013 9:32 pm
Post
by rockslayer16 » Sun Jun 02, 2013 3:22 pm
yes you have to remove the shaft, buy two belts and zip tie one behind the shaft so next time you need to change it you do not have to remove the shaft, and the belt is right there waiting. this is how mine is setup, the previous owner had done it and its a great idea.
-
Nigel
- MC crawler
- Posts: 5
- Joined: Mon May 06, 2013 3:33 am
- Location: Queensland, Australia. GMT+10
Post
by Nigel » Sun Jun 02, 2013 8:25 pm
Thanks for the tip. I will be doing that for sure!
Who is online
Users browsing this forum: No registered users and 14 guests