Restoring

Craigk79 · Post by **Craigk79** » Fri Aug 02, 2013 10:18 pm

I am restoring my 1954 JD 40C Crewlar. I just started getting some of the parts painted and I just need to ask some stuff about putting it back
Together.

-when putting back together and blast and paint the bolts how do you keep them yellow or green when you put things back?

Thanks
Craig

gregjo1948 · Post by **gregjo1948** » Sat Aug 03, 2013 5:05 am

You could just tighten them with your fingers or use rubber wrenches!

gregjo1948

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Sat Aug 03, 2013 8:51 am

I paint the bolts with an artist's brush after its all together.

Craigk79 · Post by **Craigk79** » Sat Aug 03, 2013 10:36 pm

If you paint them that way will you not see a color difference when looking at it?

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Sun Aug 04, 2013 4:39 am

It will look a little different until it dries and will need to coats. what paint are you using?

Craigk79 · Post by **Craigk79** » Sun Aug 04, 2013 5:27 am

John Deere Classic Green
John Deere Yellow

Big Bad John · Post by **Big Bad John** » Sun Aug 04, 2013 7:03 am

I'm about done with a 52 MC and I'm doing exactly what Duke said. It is working out fine for me. I would suggest that you touch up with the same paint you sprayed initially. BBJ

Craigk79 · Post by **Craigk79** » Sun Aug 04, 2013 7:00 pm

Thanks

JDcrawlers Messageboard

Restoring

Restoring

restoring

Who is online