Saw this tilt set-up on a 1010 and since I'm in the process of making my blade hyd angle on my 420, I thought it would be nice to have hyd tilt. I can manually tilt blade now. I could make this system, thats in the pic, work if I could find the pieces to mount on the blade, the rest I can build. Anybody got an idea where I could find the parts? My local JD isn't of any help. Thanks.
Cooter
6 way blade parts needed
- 1954cooter
- 430 crawler
- Posts: 52
- Joined: Sat Oct 27, 2012 6:11 pm
- Location: New Brunswick, Canada
Those pieces pretty much don't exist, they are one of the first pieces broken. The last ones I bought for my own blade were a few hundred dollars, so not cheap. If you use them for hyd tilt, they WILL be the first pieces broken. They are not designed to be a sliding piece all the time, only to adjust the blade, then locked in place again.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 52 guests