Post support questions about your JD350 and newer crawler here
-
sullyt28
- 420 crawler

- Posts: 45
- Joined: Thu May 23, 2013 6:59 pm
Post
by sullyt28 » Mon Aug 26, 2013 5:45 pm
Sully
Barrie, ON
-
jtrichard
- 350 crawler

- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Mon Aug 26, 2013 9:01 pm
it looks like the bottom rollers could be the life time lubricated ones ..
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
Lavoy
- Site Admin

- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Aug 26, 2013 11:31 pm
That would be my guess as well.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
sullyt28
- 420 crawler

- Posts: 45
- Joined: Thu May 23, 2013 6:59 pm
Post
by sullyt28 » Tue Aug 27, 2013 3:17 am
The machine mfg. date is 1986. So it sounds like I shouldn't worry about it than ? Its just a little confusing as the manual calls out to oil/grease the bottom rollers and it looks somewhat like the same fitting.
Thanks for your feedback.
Sully
Barrie, ON
-
jtrichard
- 350 crawler

- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Tue Aug 27, 2013 9:59 pm
most likely the rollers have been replaced i have a 2010 that the rollers have been replaced and they are lifetime lubed look at pic 7 and 9 you can see the rollers pretty good they are a little different than yours but they are 350 rollers ....
http://www.jdcrawlers.com/messageboard/ ... php?t=7806
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
sullyt28
- 420 crawler

- Posts: 45
- Joined: Thu May 23, 2013 6:59 pm
Post
by sullyt28 » Mon Sep 02, 2013 5:26 pm
Thanks for the pics. I wouldn't think this machine has had all the lower rollers replaced, it doesn't appear to have had a lot of maintenance furthermore the undercarriage is still at 90% (still original) in good condition.
I'll assume they are maint. free and continue running.
Sully
Barrie, ON
-
jtrichard
- 350 crawler

- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Mon Sep 02, 2013 10:13 pm
looking at the parts book the 350c still had oil type rollers ....BUT they show the lifetime ones also ..so i would guess that the lifetime were replacements and or used in the very late C models the Ds only show the lifetime ones
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 15 guests