2010 Water Pump Kit
-
- MC crawler
- Posts: 4
- Joined: Sun Apr 28, 2013 7:08 pm
- Location: Australia
- Contact:
2010 Water Pump Kit
Hi All,
I'm looking to buy a Water Pump kit for a 2010 crawler.Engine # T17513T.
Anyone know where I can get one?
thanks,
Jim
I'm looking to buy a Water Pump kit for a 2010 crawler.Engine # T17513T.
Anyone know where I can get one?
thanks,
Jim
there is no kit that i know of .... the bearing and seal can be had from other sources the impeller is JD ONLY and is at least $100 last i knew....and the seal surface on the impeller wears and wont seal so good luck impeller part# T574T seal# R32622R retainer #R1529R bearing #JD8582
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
I can get kits, but they don't include the impellor. Right or wrong, I have faced some impellors in the lathe and reused them.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
I guess if it doesn't leak or blow apart then it is rightLavoy wrote: Right or wrong, I have faced some impellors in the lathe and reused them.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Don't know if I would go that far, but it has worked in the past.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Assuming the impeller is brass or bronze, could you build them up with acetlyne torch and brass then turn then down smooth?
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
I would assume brass would be too soft and the seal would eat it in not time.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Who is online
Users browsing this forum: No registered users and 103 guests