General help and support for your Lindeman through 2010 John Deere crawler
-
VJW
- 420 crawler
- Posts: 30
- Joined: Thu May 18, 2006 6:27 pm
Post
by VJW » Tue Dec 26, 2006 4:44 pm
Recently picked up a gearmatic 8A and started taking the control lever assembly apart. Was wondering about part availability as I'm going to need the seals and cups in the lever assembly. Was also wondering if there are any manuals around on one of these. Thanks, Vic
-
JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
-
Contact:
Post
by JD430C » Tue Dec 26, 2006 5:19 pm
u can still get parts for the winch, dont know about the control. i got some back in the spring for a 8a, pm me if u want the number.
andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
-
Lavoy
- Site Admin
- Posts: 10947
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Dec 26, 2006 8:01 pm
Vic,
I have some of the cylinder parts, should be able to get more, but have not tried for sure.
Only manual availalbe would be parts manual.
Lavoy
-
VJW
- 420 crawler
- Posts: 30
- Joined: Thu May 18, 2006 6:27 pm
Post
by VJW » Wed Dec 27, 2006 5:24 am
Let me know what parts you have and the prices. Both sides of the cylinders have seized pistons and I'll probably damaged them trying to get them out. Was pretty nasty in the control valve when I took it apart. Were is the parts book availiable? Can you still get one from paccarwinch.com?
-
Lavoy
- Site Admin
- Posts: 10947
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Dec 27, 2006 11:18 am
Paccar may give or sell you one, just contact them to see.
If your pistons are that frozen, you will need complete pistons then?
Lavoy
-
VJW
- 420 crawler
- Posts: 30
- Joined: Thu May 18, 2006 6:27 pm
Post
by VJW » Wed Dec 27, 2006 3:09 pm
Yep, I'm going to need both pistons. Paccar is going to fax a copy of a parts manual to me . Thanks again. Vic
-
Bloodhound
- MC crawler
- Posts: 3
- Joined: Sun Oct 06, 2013 11:18 am
- Location: Canada
Post
by Bloodhound » Sun Oct 06, 2013 10:58 pm
Where were you getting the parts for the gearmatic model 8a winch?
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Post
by gregjo1948 » Mon Oct 07, 2013 7:54 am
If you can't find controller parts,for about $100.00 you can buy 2 new single resevoir master cylinders and fabricate a controller. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
Lavoy
- Site Admin
- Posts: 10947
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Oct 07, 2013 8:05 am
I can get kits for both.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Post
by Paul Buhler » Mon Oct 07, 2013 2:32 pm
Vic:
Send me an email and I'll send to a Gearmatic8a/g manual in .pdf It has parts numbers, pictures and specs.
Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
-
scampr
- 440 crawler
- Posts: 210
- Joined: Wed Dec 12, 2012 3:36 pm
- Location: south/central NH
Post
by scampr » Mon Oct 21, 2013 5:20 pm
Sent you a email Paul and thanks..
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
-
Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Post
by Paul Buhler » Mon Oct 21, 2013 10:40 pm
scampr: I replied. Happy wrenching.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
-
scampr
- 440 crawler
- Posts: 210
- Joined: Wed Dec 12, 2012 3:36 pm
- Location: south/central NH
Post
by scampr » Tue Oct 22, 2013 6:57 pm
Got it and thanks.. the best part is its a buddies project and i get to keep my hands clean... still looking for the sliding 2nd gear for my 440ICD and once i find that will be messy for sure..lol
scampr 440icd, 350B, 47 Farmall H, 55 Farmall cub and ashamed to have a Kabota too
Who is online
Users browsing this forum: No registered users and 154 guests