I have a 440IC manual 6 way inside blade
Good tracks
Runs
Needs steering clutches and reverser gone through.
Has welds on final cover one side.
Seat is cobbled.
Wrestling with what to do.
Input please.
Thanks,
Duke
440IC part it or rebuild
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
- Paul Koski
- 420 crawler
- Posts: 26
- Joined: Tue Jan 22, 2013 8:48 pm
- Location: Ewen, Michigan
Re: 440IC part it or rebuild
Just give it to me!DukeofDeere wrote:I have a 440IC manual 6 way inside blade
Good tracks
Runs
Needs steering clutches and reverser gone through.
Has welds on final cover one side.
Seat is cobbled.
Wrestling with what to do.
Input please.
Thanks,
Duke
Give a man a fish and he will work another day, teach a man to fish and he may never work again!
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
If you have good tracks (and I assume you mean all undercarriage parts) KEEP IT. The rest of the stuff you mention is all standard repair work with parts readily available. The direction reverser might be the exception but if you can adjust it to work in the forward position, just leave it there until you have time or an interest to fix it. Gil
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs
I guess I would fix it, but maybe I am the wrong guy to ask, if it had no finals and a hole in the block I would probably rebuild it.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Who is online
Users browsing this forum: No registered users and 81 guests