General help and support for your Lindeman through 2010 John Deere crawler
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Post
by gregjo1948 » Sat Nov 23, 2013 6:50 am
I had a 24 volt 1010 a couple years ago. Didn't start very well on 12 volts!
I bought it from son of father that passed away. I don't think he knew it was 24 volt. I winched it on my trailer to get it home and proceeded to try to fire it up on 12 volt battery. Ended up removing the starter, thinking it was shot, finding the starter #'s revealing that it was indeed a 24 volt. Started right up with 2 12 volt batteries. Whoda guessed that? gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Sat Nov 23, 2013 7:07 am
No problem!
If you are looking for a rebuild shop let me know.
There is a local shop here that works on the old starters and generators.
Might be good to have it tested.
Could be time to replace cables and make sure the connections are good.
JT thanks for the comic relief!!
Duke
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Sat Nov 23, 2013 7:32 am
OK
My bad!!
Just reviewed my post and edited it.
The Diesel starter has 9 teeth! Not 10 as previously stated.
The gas starter has 10 teeth!
I will find my list of tag #s so there won't be confusion.
Duke
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Sat Nov 23, 2013 7:52 am
If a Delco Remy it would be a 1108672 tag # for the diesel 1010.
Duke
-
TunkCreek
- MC crawler
- Posts: 4
- Joined: Wed Nov 13, 2013 9:03 pm
Post
by TunkCreek » Sun Nov 24, 2013 6:53 pm
Yep I forgot that little detail. mine is a diesel. Part # on the starter is 1107573 8 J 5; 10 tooth; another # on the gear housing is 1957960
I will email the pictures to your yahoo mail. Can't figure it out here. Thanks
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Sun Nov 24, 2013 8:29 pm
Yes it is a diesel starter from the pics you sent
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 144 guests