jd 1010 6 way blade fitment to jd 350 4 way blade
- krazyacres
- MC crawler
- Posts: 4
- Joined: Mon Dec 31, 2012 4:59 pm
- Location: West Virginia
jd 1010 6 way blade fitment to jd 350 4 way blade
I am curious if the blade assy off my 1010 will fit onto a 350. Just interested to know how hard of a job to get to fit. Or if anyone has done it.
My assumption is that the 350 is wider in the engine area than a 1010 so the C frame will be too narrow, but I don't know that for a fact.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
krazyacres-- If you don't end up mounting the 6 way off the 1010, I might be interested in buying it. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 87 guests