no power to left track

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
hokster
40C crawler
40C crawler
Posts: 23
Joined: Fri Dec 13, 2013 7:37 pm

no power to left track

Post by hokster » Sat Feb 01, 2014 1:36 pm

hey guys i cleaned up the steering clutches to left side and put back together. it worked great for a few minutes now there is no power to that track. i put blade against a snow bank and only right track will turn. is this a adjustment problem. need advice

hokster
40C crawler
40C crawler
Posts: 23
Joined: Fri Dec 13, 2013 7:37 pm

no power to track

Post by hokster » Sat Feb 01, 2014 3:45 pm

When i say only right track turns I mean the right track has power left track turns freely but no drive to it.

User avatar
Gil
1010 crawler
1010 crawler
Posts: 362
Joined: Fri Dec 14, 2007 3:19 pm
Location: Pennsylvania

Post by Gil » Sat Feb 01, 2014 7:16 pm

You can not clean up fiber steering clutch plates - you can replace them. Gil
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs

hokster
40C crawler
40C crawler
Posts: 23
Joined: Fri Dec 13, 2013 7:37 pm

no track power

Post by hokster » Sat Feb 01, 2014 8:20 pm

fiber disc are fine steel disc had light rust. over looked adjusting throw out bearing. going to try that tomorrow

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sun Feb 02, 2014 12:53 am

yes its adjustment
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

hokster
40C crawler
40C crawler
Posts: 23
Joined: Fri Dec 13, 2013 7:37 pm

no power left track

Post by hokster » Mon Feb 03, 2014 5:10 pm

Thanks for the help guys it was a throw out bearing adjustment :D

Post Reply

Who is online

Users browsing this forum: jimmydiesel and 41 guests