1010 question
- lcfrace
- 420 crawler
- Posts: 41
- Joined: Mon Nov 11, 2013 11:31 am
- Location: Bloomsburg, Pa 17815
- Contact:
1010 question
I installed a steering clucth in the one side. I jacked it all up so I could test it before installed the track back on. When I put it in gear only the side turn that had the track off. Is this normal? If not what other problem may I have. Thanks Larry
1010 JD Crawler, 310 Case dozer, 977 Case track loader, RayGo roller
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Did you make the proper adjustments with the throw out bearing, and brake band? I just installed a set of clutches on a 1010 and did the same thing. Wouldn't move because brake band was too tight. Just a thought.
Andrew
Andrew
440 ICD 64 blade & 8a gear attic winch
440 ICD 831 loader with scarifier and weights
420 62 blade 3pt
Looking for 24 scarifier and 440 log arch
440 ICD 831 loader with scarifier and weights
420 62 blade 3pt
Looking for 24 scarifier and 440 log arch
Who is online
Users browsing this forum: No registered users and 67 guests