General help and support for your Lindeman through 2010 John Deere crawler
-
plowboy
- 40C crawler
- Posts: 14
- Joined: Fri Mar 14, 2014 2:48 pm
- Location: NW Wisconsin
Post
by plowboy » Sun Mar 23, 2014 7:10 pm
Thanks, keep me posted.
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Sun Mar 23, 2014 7:35 pm
I sure don't scrap a thing unless it is total junk.
My sheds are full.
Duke
-
plowboy
- 40C crawler
- Posts: 14
- Joined: Fri Mar 14, 2014 2:48 pm
- Location: NW Wisconsin
Post
by plowboy » Sun Mar 23, 2014 8:18 pm
I'm just learning capabilities of parts on these Machines but does anything from the 1010 crawler bolt up to the 440s? Like a Dozers frame or finals or pto or such?
-
DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Post
by DukeofDeere » Sun Mar 23, 2014 8:57 pm
Not much bolts up between the 1010 and 440. Blade might be close. All the rest is different.
There are some parts 440s around.
Duke
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Mon Mar 24, 2014 10:13 am
Read this thread- it will help you with understanding undercarriage interchange between the models (scroll towards the bottom where I posted some links):
http://www.jdcrawlers.com/messageboard/ ... highlight=
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
-
plowboy
- 40C crawler
- Posts: 14
- Joined: Fri Mar 14, 2014 2:48 pm
- Location: NW Wisconsin
Post
by plowboy » Tue Mar 25, 2014 5:31 pm
Nice chart for undercarriages. Glad that mine is practically new. Have to keep my eyes open for some 12" dozer pads tho. Only half of Mine were replaced with new. Other half is worn street pads. If I can't find some I'll just weld hardox on for grousers.
-
Lavoy
- Site Admin
- Posts: 10943
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Mar 25, 2014 7:47 pm
I have a bunch of grouser stock if you decide to go that way.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 65 guests