59 icd crawler help
59 icd crawler help
I have a few questions hoping I can get answers to.first previous owner was killing tractor by piping clutch the cable from kill knob is not connected can any one tell where it hooks to or a diagram,is there a preheat for glow plugs I thought you turned key to left for awhile but this doesn't help and shouldn't I hear a click.also where do I check hydrological level? Yes it is my first machine and I know nothing about it. Thanks for any help.
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
If you have a 440ICD with the Detroit Diesel 2-53 diesel engine there are NO glow plugs. Use just a little ether in the intake. The kill cable connects to the throttle linkage at the back of the engine near where it goes in the valve cover. It is supposed to force the linkage further to the idle or off position into the valve cover. Not sure what a hydrological level is?
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
Hyd reservoir is under the front RH door on the hood.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: KoniskaMyron and 87 guests