howdy all, hope ya'll are well.
freshening up running gear.
so far I have replaced all nuts and bolts on rollers. w/grade 8 & nylocks.
crossbeam to frame etc.
on the left roller frame I have split the tracks , heated and removed the crossbeam cap bolts. 8 out, none broke... yeah .
Lavoy, the bolts are 3 1/4 long, w/flat washers only. I am thinking about going with grade 8, 3 1/2" & adding lock washers w/ the flats.
my ? is when I torque them to the spec. ft. lb. 310-330 should I use blue locktite or anti seize ?
also the outside roller frame, holt blade arm, hangars are getting new 2" boss' .
tin is getting a new coat of industrial yellow paint, she is coming along nicely
as always, thank you in advance for sharing your vast knowledge, it is greatly appreciated
420 update
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
420 update
yard dog
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
Who is online
Users browsing this forum: No registered users and 71 guests