Waiting for the call

General help and support for your Lindeman through 2010 John Deere crawler
User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Mon May 19, 2014 2:45 pm

Hi,

Joystick would be for a PAT. A PAT is usually seen on industrial machines. Manual A/T blades are more common on an Ag machine.

A manual blade just has lift, so one lever for that. The 3 pt would be another lever. A remote would be a third. So a 3 lever arrangement makes sense to me.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Mon May 19, 2014 3:00 pm

if it is a early 1010 the ser.# tag is on the right side of the engine between the oil filter and the gen.
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Post by gus » Mon May 19, 2014 5:00 pm

It's a full hyd 6 way blade and there are 4 levers on the right fender... damn I wish I'd of thought to bring a camera yesterday!!

In the photos I've seen, I do not see 2 levers on the left side of the dash. I know one is PTO and I'm thinking the other is either the rear hyd or 3 pt. Or, one of the levers on the fender is the rear outlets/3 pt.???

It has the normal 4 spd shift and throttle on the right side of the dash.

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Mon May 19, 2014 6:13 pm

YES pics would be nice and help a lot
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Post by gus » Tue May 20, 2014 10:04 am

I would really like to know what the 2 levers on the left side of the dash control, anyone?? From the tag, one is the PTO, but the other??

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2894
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Tue May 20, 2014 10:09 am

Hi,

IIRC, if that was an Ag crawler with 3pt and no blade, then the 3pt hyd control is on the dash.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

gus
2010 crawler
2010 crawler
Posts: 695
Joined: Mon Jul 16, 2007 11:55 am
Location: North West
Contact:

Post by gus » Tue May 20, 2014 1:30 pm

Stan Disbrow wrote:Hi,

IIRC, if that was an Ag crawler with 3pt and no blade, then the 3pt hyd control is on the dash.

Stan


Thanks Stan,

From that, then the 4th lever on the fender is for the rear hyd outlets and the other 3 are for the blade.

Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests