New member

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
Ranstayo
MC crawler
MC crawler
Posts: 2
Joined: Sun Jun 15, 2014 12:08 am

New member

Post by Ranstayo » Fri Jun 20, 2014 10:04 pm

Yellow to all my name is Randy and I'm a new member out in Californi. Just bought a 440ICD #449601.It only has 164 original hrs on it but needs some TLC. Wanted to now what the best service Manuel is for it. Starts up and runs great but brake pedal does not engage brake and the left track only turns at the very end of pulling the leaver. The right side works great. I paid 2800.00 with drag disk.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Sat Jun 21, 2014 10:26 am

I saw that one, looked like a nice crawler.
Only manual to buy is factory or reprint of factory, I & T are waste of money other than just spec reference.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2898
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Sat Jun 21, 2014 11:05 am

Hi,

I call them Idiotic & Terrible..... :roll:

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
pop pop
1010 crawler
1010 crawler
Posts: 490
Joined: Thu Aug 27, 2009 12:07 am
Location: chandler, arizona

Post by pop pop » Thu Jun 26, 2014 2:19 pm

hello Randy, welcome, i'm one of just a few near you. sorta depends on where in Ca. your located.
congrats-your machine has low hours.
but sounds like its all out of adjustment.
service manual is p/n SM2023.
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime :cry:

Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests