350c diesel

switchhappy · Post by **switchhappy** » Wed Jul 23, 2014 9:02 pm

iv got a 350c diesel dozer that has set for prob 4-5 years.. I changed fuel filter, installed 3 new injectors and new fuel, after going threw hell bleeding the air it started but it making a poping sound out of the intake, like pop pop pop pop.. and seems to be ruuning a lil off.. iv never messed with the 3 cylinder but common sense is telling me I have a intake valve stuck open or not closeing all the way or bent.. am I right and how should I go about checking it.. pull valve cover?

switchhappy · Post by **switchhappy** » Wed Jul 23, 2014 9:04 pm

must I add I replaced injector because the old ones were clogged up and just plain nasty looking on the end... btw them were a major fight to get out..

DrLoch · Post by **DrLoch** » Thu Jul 24, 2014 7:03 am

I would agree with your theory on an intake valve, could also be something stuck under the intake valve not allowing it to close like a rodent bone or something.

switchhappy · Post by **switchhappy** » Thu Jul 24, 2014 9:48 am

this could be true.. ill pull the valve cover today and see witch valve it is..

JDcrawlers Messageboard

350c diesel

350c diesel

Who is online