General help and support for your Lindeman through 2010 John Deere crawler
-
vailvalley59
- 430 crawler
- Posts: 51
- Joined: Fri Apr 11, 2014 7:50 am
- Location: PA
Post
by vailvalley59 » Fri Aug 15, 2014 4:12 pm
Do I have to remove parts of the JD loader valve body fender mount to remove the left steering clutch on my 2010?? Will the clutch pack clear these fender mount parts? If things need to be removed--which ones? The rear of this machine has the mounting for a backhoe but no hoe. Thanks
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Fri Aug 15, 2014 8:44 pm
I did my left clutch and dread the day i have to do the right one .... you have to remove the oil tank ..seat.. upper bracket to the hoe bracket .. track..sprocket..final drive pinon gear clutch drive shaft..upper cover and lever and presto you have the clutch out
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Fri Aug 15, 2014 8:56 pm
...and by the time you do all of that you might as well remove the final.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Fri Aug 15, 2014 11:05 pm
I have done at least 5 of the steering clutches on my 3 2010s in the last 45 years and have NEVER removed a final yet.... dont see what you would gain
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 128 guests