Post support questions about your JD350 and newer crawler here
-
Charlie
- 430 crawler
- Posts: 52
- Joined: Sun Nov 18, 2007 9:13 pm
- Location: Missouri
Post
by Charlie » Mon Oct 19, 2015 10:13 pm
Should I use teflon tape on the fitting threads that screws into the fuel pump?
JD 450c crawler loader
-
LeonardL
- 350 crawler
- Posts: 916
- Joined: Thu Oct 06, 2011 7:11 pm
- Location: Missouri
Post
by LeonardL » Tue Oct 20, 2015 9:07 pm
Yes... Just don't use too much. Wrap it once and then don't over tighten the fitting.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
-
Charlie
- 430 crawler
- Posts: 52
- Joined: Sun Nov 18, 2007 9:13 pm
- Location: Missouri
Post
by Charlie » Fri Oct 23, 2015 3:44 pm
Thanks for the reply. I used the tape making sure it was 3-4 threads from the end and its working well, no leaks.
Charlie.
Who is online
Users browsing this forum: 76450c and 9 guests
