General help and support for your Lindeman through 2010 John Deere crawler
-
Striker23
- MC crawler
- Posts: 4
- Joined: Mon Dec 18, 2006 8:04 pm
Post
by Striker23 » Tue Jan 02, 2007 11:47 pm
First timer And I need HELP. 4 spd tranny tear down, when I removed direction reverser the direct drive gear/shaft did not & will not come off the transmission input shaft. It is stuck tite. Has any one ever had this problem. Or does anyone have any idea of how to remove. Thanks.
-
Lavoy
- Site Admin
- Posts: 10952
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Jan 03, 2007 10:26 am
It should go, there is nothing that holds it on. Only thing I can think if would be rust, and shouldn't be any of that. See if you can pry on both sides at once, apply some heat, but not too much, and see if that helps.
Lavoy
-
Tigerhaze
- 350 crawler
- Posts: 2278
- Joined: Thu Jul 06, 2006 12:13 pm
- Location: West-Central MO
Post
by Tigerhaze » Wed Jan 03, 2007 11:35 am
FYI-
There is a NOS reverser assembly for the 420 on EBay right now- didn't know if you needed one or not.
Who is online
Users browsing this forum: TheGuise and 79 guests