pistons
I should be able to get them. Need to know serial number and oversize he wants.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Pistons
Hi, Lavoy.
OK...My friend needs a set (2) pistons, rings, wrist pins and retainers.
He has a styled Deere B, Supposed to be a 1949
Ser # 255003
Here's the kicker...they need to be .090 oversize.
Thanks for any help, good bad or indifferent.
If you find something, I'll have him contact you directly.
Jon K
OK...My friend needs a set (2) pistons, rings, wrist pins and retainers.
He has a styled Deere B, Supposed to be a 1949
Ser # 255003
Here's the kicker...they need to be .090 oversize.
Thanks for any help, good bad or indifferent.
If you find something, I'll have him contact you directly.
Jon K
Shows $450 for rebore kit, .090, increased compression aluminum pistons.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
Oooh. Increased compression. Turn the poppin into crackin! Nice!
Stan
Oooh. Increased compression. Turn the poppin into crackin! Nice!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
What's it increase to. I think they only have about 6.5:1 ratio to begin with.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Unknown, but I would guess a half a point or so.
Laovy
Laovy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Hi, Lavoy,
Just talked to my friend about the pistons. He said he's talked to Steiners, Drapers and several other people about the oversize pistons. They keep promising them in 2-3 weeks, but this is going on for almost a year.
He's down to the point of going .120 over size of even resleeving the block back to standard, IF he can be guaranteed getting the pistons.
So, I guess the question is : are you sure you can get the pistons.
Thank you...
Jon K
Just talked to my friend about the pistons. He said he's talked to Steiners, Drapers and several other people about the oversize pistons. They keep promising them in 2-3 weeks, but this is going on for almost a year.
He's down to the point of going .120 over size of even resleeving the block back to standard, IF he can be guaranteed getting the pistons.
So, I guess the question is : are you sure you can get the pistons.
Thank you...
Jon K
I can get one set of standard pistons at this time.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 84 guests