Lavoy....I'm beginning to wonder if I don't have a pressure plate problem.
one set of springs in the plate is broken.
Are they replaceable?
If not, do you have a pressure plate available, and if so, how much.
Thank you
Jon K
40 C Steering clutch, again, yet, still,,
Springs are not available as a service part. I have one pressure plate on hand.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
40C
Hi, Lavoy
I finally got around to putting my 40C back together this afternoon. It really wasn't a bad job at all. Everything seems to be working OK. The hardest part was getting the track back together to get the pin in. Just took a come-a-long and a couple pry bars. Ran it around the yard an everything seems to work. Have to adjust the foot brake and put the fender back on and it should be good to go.
Thanks for all your help and the parts and gauge and for all the posts and tips I got here!!!
Jon K
I finally got around to putting my 40C back together this afternoon. It really wasn't a bad job at all. Everything seems to be working OK. The hardest part was getting the track back together to get the pin in. Just took a come-a-long and a couple pry bars. Ran it around the yard an everything seems to work. Have to adjust the foot brake and put the fender back on and it should be good to go.
Thanks for all your help and the parts and gauge and for all the posts and tips I got here!!!
Jon K
No problem.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 71 guests