Post support questions about your JD350 and newer crawler here
-
boaterri
- 430 crawler
- Posts: 74
- Joined: Sat Oct 02, 2010 11:14 am
- Location: Florida
Post
by boaterri » Wed Dec 21, 2016 7:30 pm
Looks like I will be rebuilding the curl cylinder on my new old backhoe attachment. The JD parts book calls for a specific gland nut removal tool. I have had no luck finding one on line.
If the original tool is no longer available, what is the preferred tool? Also, where is the best (most reasonably priced) place to find rebuild kits?
Thanks,
Rick
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Wed Dec 21, 2016 7:55 pm
24"pipe wrench works well
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
jsal
- 1010 crawler
- Posts: 363
- Joined: Sun Oct 28, 2012 6:27 pm
- Location: armada Michigan
Post
by jsal » Thu Dec 22, 2016 3:12 am
Large hammer with with a piece of square steel or very large chisel works for me
JIM
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Post
by gregjo1948 » Thu Dec 22, 2016 4:48 am
Search "gland wrench" on line.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
boaterri
- 430 crawler
- Posts: 74
- Joined: Sat Oct 02, 2010 11:14 am
- Location: Florida
Post
by boaterri » Fri Dec 23, 2016 8:05 am
Thanks to all that replied. I have seen the gland wrenches on Google. They seem to be intended for holes in the face of the but. My gland nut has 4 slots in the edge. I did not know if those wrenches were the most appropriate for that style.
Rick
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Fri Dec 23, 2016 11:07 am
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
boaterri
- 430 crawler
- Posts: 74
- Joined: Sat Oct 02, 2010 11:14 am
- Location: Florida
Post
by boaterri » Fri Dec 23, 2016 1:38 pm
Thank you! Just the information I was looking for.
Rick
-
gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
Post
by gregjo1948 » Sat Dec 24, 2016 5:06 am
Go on ebay and under "gland nut wrench".
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 25 guests