Winch fix
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
Winch fix
Hi I am new my son and i have Goten a bei 440 we got. it. going and now we are going Go fix the winch any advice would be apreciated also if any one Knows Howe to get a manual could you Tell me
440ic
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
-
- 440 crawler
- Posts: 223
- Joined: Sun Oct 27, 2013 8:41 am
- Location: Saint John, NB, Canada
-
- 440 crawler
- Posts: 223
- Joined: Sun Oct 27, 2013 8:41 am
- Location: Saint John, NB, Canada
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
Just wanted to up date we have gotten it mostly apart had many broken bolts and the clutch and Break were welded to the drum The break adjustment nut will not come out I think I will have to cut it It is so rusted I can not tell what it should be Our plan is when the new bearings come we will put the drum back in and put the side covers on then we can use the dozer well we find or make the rest of the parts
440ic
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Hi:
I think Lavoy has those brake adjustment nuts. If you can take your winch off the machine and go at it on a bench, I think that getting your old adjuster out of its fused situation will be easier. Others may have some thoughts on this too. Good luck. Paul
I think Lavoy has those brake adjustment nuts. If you can take your winch off the machine and go at it on a bench, I think that getting your old adjuster out of its fused situation will be easier. Others may have some thoughts on this too. Good luck. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Adjusters suck when they are stuck. I have new ones on hand, find a tap and clean up the threads once you get it out, that helps tremendously.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
-
- MC crawler
- Posts: 6
- Joined: Sun Jan 22, 2017 7:34 am
- Location: Ballston spa New York
Who is online
Users browsing this forum: No registered users and 133 guests