1010 fix or part it
-
- MC crawler
- Posts: 2
- Joined: Thu Apr 06, 2017 6:30 pm
- Location: Indiana
1010 fix or part it
I have a 1010 project. I purchased it scrap value but I hope to make it usable again. The previous owner pulled the old gas engine when it went bad. He dropped a cummins diesel, fit and hook up look pretty good. Overall the track looks to be usable shape still and has a 6 way blade. My question is this, it looks like the cummins rotates cw when facing the front. Is this the correct rotation? Thanks in advance.
I hope that is a really small Cummins or the drivetrain will not survive for long.
Rotation sounds correct.
Lavoy
Rotation sounds correct.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 2
- Joined: Thu Apr 06, 2017 6:30 pm
- Location: Indiana
Antler Boy-
There are a number of posts from several years back where we discussed sources of used replacement engines for 1010 crawlers- the obvious ones were other 1010 crawlers, and 2010 crawlers if you wanted a reasonable power upgrade. However other sources included wheel tractors, combines, etc. that used engines similar to those used in the 1010s and 2010s.
http://www.jdcrawlers.com/messageboard/ ... ight=ha165
http://www.jdcrawlers.com/messageboard/ ... ht=combine
There are a number of posts from several years back where we discussed sources of used replacement engines for 1010 crawlers- the obvious ones were other 1010 crawlers, and 2010 crawlers if you wanted a reasonable power upgrade. However other sources included wheel tractors, combines, etc. that used engines similar to those used in the 1010s and 2010s.
http://www.jdcrawlers.com/messageboard/ ... ight=ha165
http://www.jdcrawlers.com/messageboard/ ... ht=combine
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: gus and 153 guests