hello everyone my 1010 gas Engine has Power to coil am getting pulse light with test light on wire to
Distributer no spark at plugs help
No spark at plugs 1010 gases
No spark at plugs 1010 gases
Old Iron Young Heart
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: No spark at plugs 1010 gases
Hi,
Test coil output by hooking one plug to the coil directly, setting plug on anything metal - hard to find metal on a crawler - and see if the coil is good on the HV side. After that, you get to look at the cap and rotor if you have spark right out of the coil.
EDIT: I now see where this post wound up duplicated. Since others are chatting in that other one, I copied my post over there.
Stan
Test coil output by hooking one plug to the coil directly, setting plug on anything metal - hard to find metal on a crawler - and see if the coil is good on the HV side. After that, you get to look at the cap and rotor if you have spark right out of the coil.
EDIT: I now see where this post wound up duplicated. Since others are chatting in that other one, I copied my post over there.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: Google [Bot] and 19 guests