350B reverse
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
350B reverse
My 350B moves forward as it should but, when going to reverse, it's slipping. Seems OK until there's a strain on it. (back blading or backing up hill) Is it in need of an adjustment or is the reverser failing? thanks, gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Re: 350B reverse
My reverser gives me a problem also. In the down position it works fine but when you pull it up it hesitates a little then moves but makes a screeching noise while moving. Thought it would straighten out after using it for a while but never did. I just leave it down and shift the tranny most of the time. Read a post somewhere that if one side went out that you could use the other side but you have to shift gears all the time. It's a pain but it works for me.
Who is online
Users browsing this forum: No registered users and 161 guests