Hello all:
While using the backhoe attachment on my 450c track loader the boom function became very sluggish and jerky. It also wanted to float up while digging unless a little down pressure was applied before dipper in. Other functions (stabilizers, swing, dipper and curl) appear to operate normally. Without the back hoe attachment the track loader hydraulics function normally.
I suspect that the boom valve has partially failed. Where can rebuild kits for these valves be purchased? I would buy all of them and change them out as a set since if one has gone away the others can't be far behind.
Thanks in advance for your suggestions.
Rick
9300 backhoe valve question
Who is online
Users browsing this forum: No registered users and 70 guests