pins and bushings for 420-440
-
- MC crawler
- Posts: 2
- Joined: Sat Jan 24, 2015 9:43 pm
- Location: louisiana
pins and bushings for 420-440
Has anyone found a good decent priced supply. Has any one used Dow tubing for bushings I have found a company in ohio offering 1.57" od 1.00id already rock hardened to 78 in 12 ft length. What are your thoughts
OD is too big, ID is probably a little tight, and 78 is too hard from what I have found.
I have beat the alternative idea to death for several years trying to cut out the middleman, I am done with it, it just can't be done economically. If I had all my time devoted to it back, I could buy 10 sets of pins and bushings.
I have worked with one of my suppliers to tool them up, and now have them available in the $1200 range for both sides. Supply is limited due to low production, but normally available.
Lavoy
I have beat the alternative idea to death for several years trying to cut out the middleman, I am done with it, it just can't be done economically. If I had all my time devoted to it back, I could buy 10 sets of pins and bushings.
I have worked with one of my suppliers to tool them up, and now have them available in the $1200 range for both sides. Supply is limited due to low production, but normally available.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Sorry, should have caught that, add about $400 labor, depends on repairs.
lavoy
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- joeturner1977
- 430 crawler
- Posts: 53
- Joined: Tue Feb 17, 2009 11:59 am
- Location: central WI
Re: pins and bushings for 420-440
Lavoy,
Are these pins and bushings still available? My crawler has been a slow restoration with all that is left is this.
Let me know how to get my hands on some.
Joe
Are these pins and bushings still available? My crawler has been a slow restoration with all that is left is this.
Let me know how to get my hands on some.
Joe
-Joe
1958 420c w/mc60 blade
1958 420c w/mc60 blade
Re: pins and bushings for 420-440
Sporadic, but yes.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- joeturner1977
- 430 crawler
- Posts: 53
- Joined: Tue Feb 17, 2009 11:59 am
- Location: central WI
Re: pins and bushings for 420-440
Do you have any? If not where can I source them? Any ideas on $.
-Joe
1958 420c w/mc60 blade
1958 420c w/mc60 blade
Re: pins and bushings for 420-440
$1100-$1200 a set last I knew. I have a set on hand.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- joeturner1977
- 430 crawler
- Posts: 53
- Joined: Tue Feb 17, 2009 11:59 am
- Location: central WI
Who is online
Users browsing this forum: No registered users and 91 guests