Are the pins and bushings available for a 40c? (I see in a older post that the 420's are and the approximate cost)Also is there any way a pin good be driven by one's self? I know all mine are getting bad but I have 1 bushing completely gone and looking for a temporary fix.
Mark:
40c track
- Mark Birdeau
- 420 crawler
- Posts: 43
- Joined: Fri Feb 29, 2008 3:36 pm
- Location: Catawba, Wi.
40c track
Mark Birdeau:
Re: 40c track
Send Lavoy an email or PM. He has had them in the past.
A track frame is your only option for the pins and bushing R&R.
Take care, Bruce
A track frame is your only option for the pins and bushing R&R.
Take care, Bruce
- Stan Disbrow
- 350 crawler
- Posts: 2899
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: 40c track
Hi,
These things are pressed into place, tightly. So, you need a lot of force to work on them. A track press is really the only option.
Stan
These things are pressed into place, tightly. So, you need a lot of force to work on them. A track press is really the only option.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Re: 40c track
Available yes, can you do it no. No offense, but been there tried that, failed, and now own a track press.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Mark Birdeau
- 420 crawler
- Posts: 43
- Joined: Fri Feb 29, 2008 3:36 pm
- Location: Catawba, Wi.
Re: 40c track
Thanks everyone!
Mark:
That's what I thought Lavoy, but I figured I'd ask just in case.No offense, but been there tried that, failed, and now own a track press.
Mark:
Mark Birdeau:
Re: 40c track
No problem.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 67 guests